How To Take Down A Ceiling Fan

Step 1 turn of the power that supplies your ceiling fan.

How to take down a ceiling fan. Disconnect the ceiling fan from the ceiling by removing the covering around the motor. Remove the fan s motor. Once the canopy is unscrewed simply lower it down so it rests on top of the fan body. Remove the metal canopy that covers the mounting bracket by loosening the screws on either side.

There will probably be four screws to remove. Step 3 if the fan has a lighting kit remove it by first unscrewing the screws of the top section of the. Put the nuts back on the wires coming from the ceiling as it will prevent any accidents if you have to turn the power back on. Lower the fan to the ground or pass to a helper if you have one.

Turn off the circuit breaker that provides power to the hunter ceiling fan and confirm that the power is off by trying to turn the fan on. Remove the wire nuts and the wires. Remove the light bulbs and lamp shades if your hunter ceiling fan is equipped with these. I go through the steps to remove a direct connect ceiling fan.

How to remove a hunter ceiling fan. Step 2 loosen the screws on the globes and remove the globes and light bulbs and set them aside. Hold the fan tightly and slide the ball at the top of the fan pole out of the mounting bracket. Be sure to turn off the electric going to the circuit that you are working on.

Set the blades aside. You may need to use a very short screwdriver to get between the housing at the ceiling and the main body of the ceiling fan. Remove them with one hand while supporting the fan with your other hand. Locate the two or three screws holding the canopy which covers.

Unscrew the screws that are holding the fan s canopy it is the part over the motor. Unscrew with a screwdriver or allen key the two or three screws holding each fan blade to the motor housing.