How To Take Links Out Of A Tag Heuer Watch

If you are only removing one link you can take it from anywhere on the strap.

How to take links out of a tag heuer watch. Of pressure using a tool with a tip smaller than the head of a pin to remove links from tag heuer watches. A short video on how to remove links from the bracelet of a tag heuer formula 1 gmt. To do this hold the band in one hand while holding the bergeron pin tool in the other. None of the links on that model of tag have a split pin pin or tube etc they re all fastened inside of the link itself you punch out the pin and remove the tube securing the bracelet to the clasp on whatever side you wish to adjust one side of the first exposed link will slide off then a screw is exposed you have to undo that screw and take each link apart individually.

Put the watch on your wrist and see how many links you wish to remove. The watch still works. Designate an area where you can pile all of the removed links and pins. To actually remove the links use a tool called a small hole punch to access the hole of the link you want to remove.

Lay the soft cloth out on your working surface. You must be able to apply about 20 lbs. Use the pin end of the tool to push on the small heads of the pins. Push until the link bar comes out the opposite side then detach the link bar with a pair of pliers.

If that doesn t sound like a problem to you go ahead and give it a try. There s a friction pin on both sides of the buckle and once pulled out there s simply a screw on each link to remove. Wear the watch and pinch the excess length together to figure out how many links you need to remove. To remove more than one link you should remove links from both sides of the strap to ensure that the clasp remains centered.