How To Use A Manual Inflate Blood Pressure Kit

An appropriately sized blood pressure cuff 3.

How to use a manual inflate blood pressure kit. Let the pressure fall 2 millimeters or lines on the dial per second while listening for your heart sounds. Once the cuff is inflated the monitor will determine your blood pressures by analysis of your pressure oscillations. Thank you for purchasing the omron hem 431c manual inflation blood pressure monitor. Turn the knob on the pump toward you counterclockwise to let the air out slowly.

The patient should sit upright. A blood pressure measurement instrument such as an aneroid or mercury column sphygmomanometer or an automated device with a manual inflate mode. If you do not know your normal blood pressure inflate the cuff until the gauge reads between 160 to 180 mmhg. Rapidly squeeze the pump bulb until you no longer hear the sound of your pulse through the stethoscope.

Step 2 prepare the patient. Begin inflating the cuff by rapidly squeezing the inflation bulb until youhave reached approximately 30 40 mmhg higher than your normal systolic reading. Your new hem 431c features an easy to squeeze inflation bulb that allows you to quickly. This is your systolic pressure.

Stop once the gauge reads 30 to 40 mmhg above your normal blood pressure. Release the pressure until the pulse returns and note the. Note the reading when you first hear a heartbeat. If your normal systolic blood pressure is unknown inflate the cuff to 180 mmhg.

Make sure the patient is relaxed by allowing 5 minutes to relax before the first reading. This easy to use monitor quickly detects your blood pressure and pulse measurements and displays them on a clear digital panel. If your normal systolic blood pressure is unknown inflate the cuff to 180 mmhg. This manual inflate digital blood pressure monitor pro vides systolic pressure diastolic pressure and pulse readings quickly and easily.