How To Use Manual Blood Pressure Cuff

While palpating the radial pulse inflate the cuff until the pulse disappears.

How to use manual blood pressure cuff. Use palpation to estimate the systolic blood pressure. A blood pressure cuff is a piece of medical equipment used to measure an individual s blood pressure. The length of the cuff s bladder should be at least equal to 80 of the circumference of the upper arm. All display symbols should appear briefly followed by a zero.

How to measure blood pressure using a manual monitor duration. Release the pressure until the pulse returns and note the. If this value is unknown you can inflate the cuff to 160 180 mmhg. Stop once the gauge reads 30 to 40 mmhg above your normal blood pressure.

This indicates that the monitor is ready. A blood pressure cuff is composed of a cuff or sleeve a meter an inflation bulb and hoses that connect everything together. The gauge should read 30 to 40 mmhg above the person s normal bp reading. It contains several individual parts and may need to be assembled prior to use.

How do i do a step by step blood pressure check. When the bp cuff has inflated enough to stop blood flow you should hear no sounds through the stethoscope. An aneroid monitor is. Hold the bulb in your right hand.

If you do not know your normal blood pressure inflate the cuff until the gauge reads between 160 to 180 mmhg. Pull the end of the cuff so that it s evenly tight around your arm. Wrap the cuff around the upper arm with the cuff s lower edge one inch above the antecubital fossa. When you re ready to take your blood pressure sit quietly for three to five minutes beforehand.

To begin blood pressure measurement use a properly sized blood pressure cuff. If you have a monitor with. If pulse sounds are heard right away inflate to a higher pressure. To begin place the cuff on your bare upper arm one inch above the bend of your elbow.

Press the power button. Inflate the cuff by squeezing the bulb with your right hand.